I started programming in 1978 (In Assembler) and wanted to know not only how the software worked but how the hardware worked.
Found a great kit using the Z80 and built it and spent many nights with a logic probe and oscilloscope learning digital eletronics. Also devoured the Z80 manual learning the instruction set.
I'm nearly 70 now but remember those days like they were yesterday.
As the proud owner of a ZX-81 I remember staring at the Z80 instruction reference at the end of the user's manual without the faintest clue of what any of that meant. It took me some while before I managed to wrap my head around how CPUs actually run programs (vs. the high level abstractions like BASIC or other languages).
This is the CPU that I first learned to code on, first in TI Basic (TI-8[1356] ftw) and then Z80 assembler. Crazy to think that the CPU was "old" when I started, and it's still doing good work in those calculators even 20+ years later.
There are plenty of open core alternatives that replicate the architecture and ISA. Many of these are cycle accurate. Some have been tape-out proven. Hobbyist retro-computing enthusiasts who wish to build a Z80 system still have options even once new old stock and recovered CPUs become scarce.
No mention of the TI-84 calculator? Used by millions of American schoolchildren, programmable in BASIC, and runs on Z80 (B/W models)/eZ80 (color display models) to this day
Europe too :) When I was in high school, TI-84 Plus was the calculator the school told all of us to buy. And I see that stores in my country are still stocking them so I have to assume they are still being bought and used.
Many hours were spent by me and my friends making and showing off little programs in TI-BASIC on those calculators. None of us ever took it all the way to learning Z80 assembly however. I printed a whole manual about Z80 assembly programming for the TI-84 Plus and started reading it but never wrote a single line of assembly for it. Yet.
Same here (actually had a voyage 200, but same same I guess). It's actually quite insulting that TI kept (and keeps?) selling waaay outdated hardware at horrendous prices. It's the SAP/Oracle business model applied to school hardware.
First, my Father wanted to try to add some peripherals to the original TRS-80 Model 1. So, what he was interested in doing was asserting the BUSREQ pin to tell the Z80 to get ready so that he could have the bus, ideally waiting for the BUSACK signal to know when it was his.
Unfortunately, on the Model 1, when you assert the BUSREQ pin, it is tied directly to the tri-state buffers that handle the address and data bus. So, as soon as you make the request, the Z80 loses all access to its memory and data -- mid cycle. Which, you know, can be Bad. Radio Shack labels this pin TEST and uses it for internal testing. But it was definitely a bit of a disappointment to my Fathers efforts.
The second one is when I learned that the Game Boy Advance has a Z80 built into its chip. The designers drag and dropped a Z80 core (tweaked for GB) just so they could run legacy GB games on it. It just kind of bends your view of the computing world when something as significant as a Z80 can just be shoved into the corner of a die for "just in case" functionality.
Happy birthday! The Z80 was the first CPU I rode, more luxurious than the subsequent 6502 and 6510. I still have a TI calculator with a low-energy Z80.
Found a great kit using the Z80 and built it and spent many nights with a logic probe and oscilloscope learning digital eletronics. Also devoured the Z80 manual learning the instruction set.
I'm nearly 70 now but remember those days like they were yesterday.
Truly a magnificent CPU
Still I've always loved the z80, since my first computer the ZX Spectrum. Even now I play with z80 assembly now and again (mostly for CP/M retro-use).
Europe too :) When I was in high school, TI-84 Plus was the calculator the school told all of us to buy. And I see that stores in my country are still stocking them so I have to assume they are still being bought and used.
Many hours were spent by me and my friends making and showing off little programs in TI-BASIC on those calculators. None of us ever took it all the way to learning Z80 assembly however. I printed a whole manual about Z80 assembly programming for the TI-84 Plus and started reading it but never wrote a single line of assembly for it. Yet.
First, my Father wanted to try to add some peripherals to the original TRS-80 Model 1. So, what he was interested in doing was asserting the BUSREQ pin to tell the Z80 to get ready so that he could have the bus, ideally waiting for the BUSACK signal to know when it was his.
Unfortunately, on the Model 1, when you assert the BUSREQ pin, it is tied directly to the tri-state buffers that handle the address and data bus. So, as soon as you make the request, the Z80 loses all access to its memory and data -- mid cycle. Which, you know, can be Bad. Radio Shack labels this pin TEST and uses it for internal testing. But it was definitely a bit of a disappointment to my Fathers efforts.
The second one is when I learned that the Game Boy Advance has a Z80 built into its chip. The designers drag and dropped a Z80 core (tweaked for GB) just so they could run legacy GB games on it. It just kind of bends your view of the computing world when something as significant as a Z80 can just be shoved into the corner of a die for "just in case" functionality.
Just shows how far we had come at the time.
Cheers to Rodnay Zaks for "Programming the Z80"!